Case Study 1

Highest Ampere Capacity & Longest Power Control Centre ever made by AAVEG.

Client: M/S SURYA ROSHANI LTD., MALANPUR, M.P., INDIA.
Panel Type: Panel Distribution Board with Auto Synchronization & Double Busbar System.
Voltage: 415V AC 50Hz. 3 Phase 4W, Fault Level: 95 KA.

DESCRIPTION OF POWER CIRCUIT:

TRANSFORMER SUPPLY (BUSBAR-I)

• TX INCOMER I = ACB 6000A 4P EDO
• TX INCOMER II = ACB 6000A 4P EDO
• TX BUS COUPPLER I = ACB 6000A 4P EDO

DG SUPPLY (BUSBAR-II)

• DG INCOMER I = ACB 3200A 4P EDO
• DG INCOMER II = ACB 3200A 4P EDO 
• DG INCOMER III = ACB 3200A 4P EDO
• DG BUS COUPLER I = ACB 3200A 4P EDO
• DG BUS COUPLER II = ACB 3200A 4P EDO                                                                                                                                                                                                                              

Apart from individual power available from each power supply, panel can be automatically synchronized by Auto Synchronizing Relay & PLC Controllers.                                                                                        

OUTGOING FEEDER: Power Change Over from Transformer to DG & viceverse is designed with the use of ACBs. Total No. of Feeder as:

• ACB 2500 Amp =14
• ACB 2000 Amp =10
• ACB 1000 Amp = 8 

Case Study 2

The Electrical/Electronic automation is a major requirement of every industry. These systems used in industries must be designed for maximum operational reliability, engineered with the latest technology for optimum efficiency.

At AAVEG, we have manufactured Potato Chips Process Line Control Panel which is fully automized Electrical/Electronic control system, designed for 1000kg/hr potato chips production. To complete this process from raw potato to spiced chips packed in nitrogen packing required automation of 40-45 machines at various stages. To achieve this, we use HMI, VFD, PID, Level &Temperature Controllers, Scanner, PLC, Alarm, Protection Relays, Photo Sensors, SCADA Software, Web/Cloud Monitoring etc.

Case Study 3

Dynamic or Real Time Power Factor Correction Panel

In some industries, where fluctuating load like Welding/ Presses/Wind Turbines/Cranes /High Rise Lifts/etc. is high, which disturbs quality of power supply, means parameters such as power factor, transients, harmonics, voltage and frequency variation and other disturbances, causing additional losses to the Electrical networks and thus adversely affecting the economics of energy transmission. To improve the power factor as well as overall power quality, power factor correction capacitors are commonly used. But due to fast fluctuating load, we need thyristor switching of capacitor instead of conventional contactors, which switches at zero crossing of the Sinusoidal wave and total switching time in milliseconds instead of 60 seconds.

At AAVEG, we manufacture DYNAMIC PFC, which improves Total Quality of Electrical Power.